Assistrail™ - Disability Handrails
The Assistrail AS 1428.1-2009 compliant range has been developed to provide a solution to the ever increasing emphasis placed on ease of access for persons with disability.
Whether your application is a new project or an upgrade to an existing building to meet Australian Standards, the Assistrail range makes compliance with the Standards easy and cost effective.
WHY USE ASSISTRAIL™?
- Smooth handrails
- Suits ramps, stairs or other applications
- No site welding
- Unlimited configurations
- Can be supplied in a range of paint finishes to suit individual applications
AS 1428.1-2009
10.3 (i) Ramps and intermediate landings shall have kerb rails on both sides that comply with the following:
(i) The minimum height above the finished floor shall be 65mm.
(ii) The height of the top of the kerb or kerb rail shall not be within the range 75mm to 150mm above the finished floor.
(iii) There shall be no longitudinal gap or slot greater than 20mm in the kerb or kerb rail within the range 75mm to 150mm above the finished floor.
12 (i) Handrails shall have no obstruction to the passage of a hand along the rail.
10.3 (i) Ramps and intermediate landings shall have kerb rails on both sides that comply with the following:
(i) The minimum height above the finished floor shall be 65mm.
(ii) The height of the top of the kerb or kerb rail shall not be within the range 75mm to 150mm above the finished floor.
(iii) There shall be no longitudinal gap or slot greater than 20mm in the kerb or kerb rail within the range 75mm to 150mm above the finished floor.
12 (i) Handrails shall have no obstruction to the passage of a hand along the rail.
